Flitz Polish - Paste - 2.0 lb. Quart Can

First this a great product, second it's messy so absolutely wear gloves and place whatever you cleaning or removing surface marks on a towel or something that will keep any excess from getting on other surfaces, don't get me wrong this product can be removed easily on smooth surfaces but will require some work on porous, textured or uneven surfaces (a moist toothbrush is useful). Use a terry cloth towel for the initial clean-up/wiping and then a microfiber towel for the polishing step, also keep a moist microfiber for wiping off around tight areas with grooves or irregularities. If you're removing minor scratches from metal, use steel wool (use bronze wool only on boats) the flakes will rust if you use steel wool, with a small amount of product on coarse to extra fine wool, don't be too worried about leaving marks with the coarse take your time and use the right amount of pressure for the type of material being cleaned, the finer steel wool will remove any marks left from the medium or coarse wool and leave a brilliant finish. For plastics or rubber clean small areas at a time and use small amounts of the product it makes life easier. When cleaning metals the product gets dark and messy this is normal, but remember it's messy if you touch anything other than what you want to clean it's more areas to wipe, have lots of gloves. The stuff cleans/works fantastically and leaves a protective layer for several weeks, want to make your stainless steel sink look brand new (wow), I have used it on metal, plastic, rubber, glass, and on cars and boat clear coats for small areas, compounds work much easier on large areas and in areas with seams or grooves not a knock on Filtz just experience with car and boat finishes, now for all the other surfaces forget about it this stuff is the best by far!!! You can protect with other quality coatings (polishes, waxes, or whatever you like) after cleaning or removing marks. I've used the product for years especially on my boat metalwork, isinglass, fiberglass, and chrome, lights, exhaust tips on cars, anything metal this is what you want!! Remember small amounts, small areas at a time. Last thing if the product dries or your forget to wipe off an area don't worry using a moist cloth/soft brush will easily remove it and doest harm the surface. Hope this helps

Its about as easy as a metal polish can get. Place some on a cloth and rub on your metal object and just watch it magically get bright and shiny! I have used this on brass, chrome, and aluminum. It applies easily and it comes off easily too. Use a second clean cloth to remove what's left of polish and buff the metal clean. Stand back and look at the shine! Yes, its a bit pricy, but its worth every cent.

Very good and easy to put on and easy to use