Description
Protect bilge areas with solvent- and sludge-resistant BilgeKote Enamel. Bilgekote is a fast-drying, durable coating formulated for application to bilge areas. Discover the Benefits of INTERLUX Bilgekote Enamel helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Additionally, Bilgekote can be used to protect lockers and bulkheads from moisture penetration.
Key Features
- Resistant to chemicals, fuel, oil and fumes
- Cleans easily for reduced maintenance
- Considerable application covering due to the paint's high density
- Hard-wearing coating for bulkheads
Physical Data
- Type: One-part enamel
- Finish: Semi-gloss
- Available Colors: Gray, White
- Components: 1
- Solids by Volume: 44%
- Coverage: 450sq.ft/gal.
- VOC: 414g/l
Application
- Application Method: Brush, roller, airless or conventional spray
- Number of Coats Recommended: 2-3 minimum
- Wet Film Thickness/coat: 4.5 mils
- Dry Film Thickness/coat: 2 mils
- Application Temperature Min./Max. Range: Minimum 50°F. and Maximum 95°F.
- Thinner: Brushing Liquid 333, Model 117945 or Special Thinner 216, Model 117598
Drying Times* (Hours)
| Drying | @59°F | @73°F | @95°F |
|---|---|---|---|
| To recoat | 3 hr. | 2 hr. | 1 hr. |
| To launch | 16 hr. | 12 hr. | 8 hr. |
Specifications:
| Application Method | 1 to 2 Coats Recommended: Brush, Roller or Spray |
| Capacity | 1 Quart |
| Color | White and Gray |
| Coverage | 112 Square Feet/Quart |
| Cure Time | To Overcoat: 1-3 Hours; To Launch: 8-16 Hours |
| Type | Bilge Enamel |
Specifications
- California Residents:
- WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov
- Note:
- Due to differences in screen settings and resolution, actual paint colors may vary slighty from the swatches shown.
- Hazardous Shipping:
- This item has D.O.T. Hazard Shipping Restrictions and cannot be shipped in the air. It can be ordered online for shipment by Ground Shipping .
