Description
Interlux Pre-Kote Plus Primer - White Gallon. Before applying a topside enamel, begin the job right with Pre-Kote One-Part Primer. Pre-Kote* is VOC compliant, one-part undercoater formulated for use with Toplac®, Brightside® Polyurethane or any one-part topside enamel. Pre-Kote contains microspheres which help you to attain the necessary build and also improve sandability. Pre-Kote replaces Brightside Primer and 279 White Undercoater.
Key Features
- Contains microspheres which give Pre-Kote a superior build
- VOC compliant
- Can be used with any one-part topside finish
- Improves topcoat flow
Physical Data
- Type: One-part polyurethane with microspheres
- Finish: Matte
- Available Colors: White, Gray
- Components: 1
- Curing Mechanism: Solvent release
- Solids by Volume: 61%
- Coverage: 450sq.ft/gal.
- VOC: 330g/l
Application
- Application Method: Brush, roller, airless or conventional spray
- Number of Coats Recommended: 1-2
- Wet Film Thickness/coat: 3.5 mils
- Dry Film Thickness/coat: 2 mils
- Application Temperature Min./Max. Range: 10°C/50°F--29°C/85°F
- Thinner: Brush: 333 - Model 117945; Spray: 216 - Model 117598
Drying Times* (Hours)
| Drying | @50°F | @73°F | @95°F |
|---|---|---|---|
| To Touch | 3 hr. | 2 hr. | 1 hr. |
| To recoat | 12 hr. | 8 hr. | 6 hr. |
*The above dry times are minimums. May be recoated after the minimum time shown. There is no maximum dry time before launching.
Specifications
Application Method: 1 to 2 Coats Recommended, Brush, Roller or Spray
Capacity: 1 Gallon
Color: White
Coverage:112 Square Feet/Quart
Cure Time: To Overcoat: 6-12 Hours; To Touch: 1-3 Hours
Type: One-Part Polyurethane with Fluoro-Micro Additives, Topside Epoxy Primer
Specifications
- California Residents:
- Cancer and Reproductive Harm - P65Warnings.ca.gov
- Hazardous Shipping:
- This item has D.O.T. Hazard Shipping Restrictions and cannot be shipped in the air. It can be ordered online for shipment by Ground Shipping Methods
