Description
High copper content provides long-term protection against severe bottom fouling.
Ultra-Kote hard antifouling paint is heavily loaded with cuprous oxide for maximum performance in severe fouling conditions. The modified epoxy formula results in a durable finish with excellent color stability. This durable finish stands up to abrasion and when needed, periodic scrubbing by a diver. Ultra-Kote is also low in VOCs, which minimizes its impact on the environment; and it dries quickly so you can paint and launch on the same day. Ultra-Kote is a great choice for fiberglass, steel, and wood boats in brackish or salt water. We offer Ultra-Kote in Red, Blue, Green and Black.
Key Features
- Durable finish stands up to abrasion
- Good choice for medium to high fouling areas
- Excellent color stability
- Low-VOC formula limits solvent emissions
- Suitable for use on power and sailboats in all waters
Physical Data
- Vehicle type: Cuprous oxide
- Finish: Matte
- Available colors: Blue, Green, Red, Black
- Components: 1
- Curing mechanism: Solvent release
- Solids by Volume: (Theoretical): 63%
- Coverage: 506sq. ft./gal.
- VOC: 327d grams/liter (as supplied)
- Active ingredients: 57% Cuprous Oxide
Application
- Application Method: Brush, roller, airless, or conventional spray
- Number of coats recommended: 2 coats, 3 on bare wood (first coat thinned)
- Wet Film Thickness: 3.2 mils/coat
- Dry Film Thickness: 2 mils/coat
- Applicator: High-quality short nap roller (maximum 3/8” nap)
- Application temperature Min. /Max. Range: 10°C/50°F and maximum 35°C/95°F.
- Thinner: Special Thinner 216, Model 117598 , Brush-Ease 433, Model 203679
Drying Times* (Hours)
| Drying | @50°F | @73°F | @95°F |
|---|---|---|---|
| To touch | 3 hr. | 1 hr. | 30 min. |
| To recoat | 6 hr. | 4 hr. | 2 hr. |
| To launch | 12 hr. | 8 hr. | 6 hr. |
*The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching.
Get the right amount of paint:
| Boat Type | Bottom Paint |
|---|---|
| 10' Dinghy | 1 qt. |
| 14' Outboard | 1-2 qt. |
| 18' Runabout | 2 qt. |
| 20' Sailboat | 3 qt. |
| 24' Runabout | 3-4 qt. |
| 30' Sailboat | 1.5 gal. |
| 32' Cruiser | 1.5-2 gal. |
| 36' Auxiliary | 2 gal. |
| 40' Cruiser | 2.5 gal. |
| 45' Sailboat | 3-3.5 gal |
| 50' Sportfisher | 4+ gal. |
Another way to determine bottom paint quantity is to estimate the approximate surface area of the hull below the waterline, using the following formula:
Length x Beam x .75 = Approximate underwater surface area in square feet.
Each paint has a “theoretical coverage” area, but most paints require at least two coats, so you can expect actual coverage to be no greater than half of the theoretical value.
Specifications
- Hazardous Shipping:
- This item has D.O.T. Hazard Shipping Restrictions and cannot be shipped in the air. It can be ordered online for shipment by Ground Shipping Methods
- Item may require Truck Shipping:
- Indicates an item that may only be available for shipment via LTL carrier (truck)
- California Residents:
- Cancer and Reproductive Harm – www.P65Warnings.ca.gov
