null

Show Your Boat A Little TLC

Get the job done right with trusted maintenance supplies and upgrades from top brands.

/
Sale

Pettit Paint

PETTIT PAINT Old Salem Non-Antifouling Hard Racing Copper Bronze Paint, Quart

(No reviews yet) Write a Review
MSRP $176.95
$140.00
(You save $36.95 )
SKU:
MW-PET1959Q
UPC:
725469003330
Condition:
New
Availability:
Ships Within 24 Hours
Weight:
10.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Description

PETTIT PAINT Old Salem Racing Copper Bronze Paint Quart

Buff your boat’s bottom to an ultra-smooth racing surface.

PETTIT PAINT Old Salem Racing Copper Bronze Quart. Recommended for use in freshwater on racing hulls, sailboats, runabouts or cruisers, Petit Old Salem Hard Racing Copper Bronze is a good choice for creation of a hard, smooth racing surface. Although Petit Old Salem Hard Racing Copper Bronze is not an antifouling paint, it does contain copper flake pigment, which accounts for its characteristic bronze hue. It can be buffed to a high gloss for an ultra-smooth racing surface. Excellent for trailered boats, and suitable for use on fiberglass, wood and steel hulls.

Key Features

  • For dry sailed boats or boats stored in non-fouling fresh water
  • Can be buffed to give a high gloss, ultra smooth surface
  • Suitable for use on fiberglass, wood and steel hulls
  • Excellent for trailered boats

Physical Data

  • Type: Oleoresinous Varnish
  • Finish: Glossy 
  • Available Colors: Bronze 
  • Components: 1
  • Curing Mechanism: Solvent Release Oxidation 
  • Solids by Weight: 63 +/- 2%
  • Solids by Volume: 43 +/- 2%
  • Coverage: 800sq.ft/gal.
  • VOC: 450 g/l (3.76 lbs. /gal) as supplied
  • Flash Point: 106°F

Application

  • Application Method: Brush, roller, airless or conventional spray
  • Number of Coats Recommended: 
  • Wet Film Thickness/coat:  2.3 mils
  • Dry Film Thickness/coat:  1.0 mils
  • Application Temperature Min. /Max. Range: 50° F. Min. /90° F. Max.
  • Thinner: 121 Spraying Thinner, Model 249995; 120 Brushing Thinner, Model 249961

Drying Times* (Hours)

Drying @50°F @70°F @90°F
To recoat  36 hr.  16 hr.  8 hr.
To launch  8-days   4-days  2-days

*The above dry times are minimums. May be recoated after the minimum time shown. There is no maximum dry time before launching.

Specifications:

Aluminum Safe Not Aluminum Safe
Anti-Slime Additive None
Biocide Cuprous Oxide
Color Brown
Capacity Quart
Copper Free Not Copper Free
Coverage 200 Square Feet/Quart
Cure Time To Overcoat: 8-36 Hours; To Launch: 2-8 Days
Type Modified Epoxy

Recommended Products