Description
PETTIT PAINT Trinidad XSR Antifouling Paint
PETTIT PAINT Trinidad XSR Antifouling Paint, Gallon. Trinidad XSR is the new standard by which hard-bottom paints are measured. Trinidad XSR delivers exceptional, tri-biocide performance by combining the highest levels of Copper Thiocyanate, ECONEA®, and Zinc Pyrithione in the industry. This combination makes the Trinidad XSR effective against all types of fouling while significantly reducing the overall environmental impact through the use of less copper.
The Trinidad XSR not only reduces the amount of copper used but also provides significantly better overall performance through new biocide technology. Trinidad XSR does not require movement and works equally as well at the dock or underway. Its durable, hard finish has excellent adhesion and is highly abrasion-resistant.
Left in the water, Trinidad XSR will provide years of dependable service. Trinidad XSR offers excellent antifouling protection backed up by the industry’s strongest Warranty. HD (Hull Defense 24 Month Limited Warranty) offers peace of mind to any boater in every harbor. Trinidad XSR provides the most dependable and trusted hard antifouling paint to every boater and applicator in the industry.
Features:
- Three biocides provide unparalleled multi-season protection in the harshest environments
- Maximum protection against all types of marine growth
- Scrubbable and durable finish
- Covered by the enhanced HD (Hull Defense) 24 Month Limited Warranty
Specs:
- Aluminum Safe: Yes
- Anti-Slime Additive: Zinc Pyrithione
- Biocide: Cuprous Thiocyanate, ECONEA, Zinc Pyrithione
- Cannot Be Left Out of Water
- Coverage: 435 Square Feet/Gallon
- Cure Time: 90 degrees F - 1/4 hour to touch. 2 hours to recoat. 4 hours to launch. 70 degrees F - 1/2 to touch. 4 hours to touch. 8 hours to launch. 50°F - 1 hour to touch. 8 hours to recoat. 16 hours to launch
- Type: Hard Modified Epoxy
- Water Type: Brackish Water, Cold, Warm, Saltwater
Specifications:
| Aluminum Safe | Aluminum Safe |
| Anti-Slime Additive | Zinc Pyrithione |
| Biocide | Cuprous Thiocyanate, ECONEA, Zinc Pyrithione |
| Can Be Left Out of Water | Cannot Be Left Out of Water |
| Capacity | 1 Gallon |
| Copper Free | Not Copper Free |
| Coverage | 435 Square Feet/Gallon |
| Cure Time | 90 degrees F - 1/4 hour to touch. 2 hours to recoat. 4 hours to launch. 70 degrees F - 1/2 to touch. 4 hours to touch. 8 hours to launch. 50 degrees F - 1 hour to touch. 8 hours to recoat. 16 hours to launch. |
| Type | Multi Seasonal Hard Protective Coating |
| Water Type | Brackish Water, Cold, Warm, Saltwater |
