Description
Toughened, versatile, liquid epoxy resin for permanent bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods.
G/flex 650 is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives G/flex 650 the ability to make structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives, and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, G/flex 650 gives you 45 minutes of working time at 72°F. It reaches an initial cure in 7 to 10 hours and full cure in 24 hours. 650 G/flex Resins should be paired with comparable size 650 G/flex Hardeners. Includes 4 ounces of resin and 4 ounces of hardener.
Kit Contents
- 4 ounces resin; 4 ounces hardener
Key Features
- More flexible than standard epoxy or polyester resins
- Structural bonds absorb stress of expansion, contraction, shock and vibration
- Good for bonding dissimilar materials
- Can be modified with WEST SYSTEM fillers and additives
Specifications
- Formulation: Two-part epoxy
- Mix Ratio: 1 : 1
- Working Time: 46min. @ room temperature
- Drying Time: Initial cure: 6-10hrs.; Full cure: 24hrs.
Specifications
| Best Use | Liquid Epoxy for Bonding |
| Capacity | Two 4 Ounces |
| Color | Clear Amber |
| Cure Time | 7 to 10 Hours (Working Time 75 Minutes) at 72 F |
| Type | Two-Part Epoxy Resin |
Specifications
- California Residents:
- This product can expose you to chemicals including epichlorohydrin, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
