Description
The Weld Mount AT-2010 Acrylic Adhesive is a high-performance, two-part structural methacrylate adhesive designed primarily for bonding fasteners, wire runs, and tubing in production settings. It is Weld Mount's top-selling adhesive due to its high viscosity, which prevents parts from sagging or sliding during application.
Key Specifications & Performance
- Working Time: 4 minutes.
- Fixture/Set Time: Cures in 5–6 minutes.
- Working Strength: Reaches usable strength in 15–20 minutes at 72°F (\(22^{\circ }\text{C}\)).
- Full Strength: Reached within 24 hours.
- Gap Filling: Capable of filling gaps up to 0.375 inches.
- Bonding Capacity: A single 50ml cartridge typically bonds 150–200 parts.
Substrate Compatibility
It bonds to a wide range of materials with minimal surface preparation:
- Metals: Aluminum, steel, stainless steel, and coated metals.
- Composites: Fiberglass, epoxy, gel coats, and carbon fiber.
- Plastics: Acrylics, ABS, PVC, and polycarbonate.
- Exclusions: It is not recommended for galvanized metal, rubber, or low-surface-energy plastics like StarBoard, polypropylene, or HDPE.
Usage & Storage Recommendations
- Application: Requires the Weld Mount AT-300 Dispensing Gun and AT-850 Static Mix Tips for proper mixing and application.
- Storage: Has a 6-month shelf life at room temperature (72°F). Refrigeration is strongly recommended by the manufacturer to extend shelf life up to one year.
***Safety Note: This product is classified as hazardous and must be shipped via ground only.
