Description
The Weld Mount 8040 Acrylic Adhesive w/Plunger (Part #804030) is a 30ml manual-plunger version of the AT-8040 structural adhesive, designed for bonding fasteners to metal, plastic, and composite surfaces without the need for a dispensing gun.
Key Specifications & Performance
- Bonding Strength: Develops a high-strength bond, reaching approximately 2,500 lbs. of strength in 40 minutes.
- Working Time: You have roughly 6 minutes to work with the adhesive before it begins to set.
- Cure Time: It achieves a handling cure in 10–12 minutes and reaches full working strength in 40 minutes.
- Coverage: A single 30ml cartridge is typically sufficient to bond 30–50 parts.
- Shelf Life: 12 months when stored at 72°F; refrigeration is recommended to maintain stability.
Application Details
- Easy Manual Use: Because this version includes a built-in plunger, you do not need the AT-300 dispensing gun or static mixing tips.
- Mixing Method: Snip the end caps, dispense the desired amount onto a clean surface, and mix by hand before applying.
- Non-Sag Formula: Designed with high viscosity to prevent parts from sliding or sagging on vertical or overhead surfaces.
